550W 39.4 * 10in Manual Wood Lathe Kit，With Lathe Extension Guide & 8-piece 65 Manganese Steel Turning Tool & 6in Linkage Chuck， For Woodworking DIY Wood Turning

Specifications:Main material of lathe: cast ironLathe size: 750*200*455mm/29.5*7.87*17.9inVoltage: 220V (voltage can be shipped to you according to the voltage of the country where you place the order)Frequency: 50HZSwing diameter: 254mm/10inMotor power: 550WTool holder length: 152MM/5.98inMaximum processing length: 450MM/17.7inDisk diameter: 75mm/2.95inStepless speed regulation: three-speed speed regulation 650-1450RPM/1600-3800RPM/1250-2800RPM, packaging size: 84X46X30CM/33*18*11.8in.Lathe weight: 38kg/83.77lbLathe extension guide weight: 10kg/22lb8-piece tool set weight: 1.8kg/4lb6in linkage chuck weight: 5kg/11lbPacking list:1 x Manual 550W wood lathe1 x Plum blossom ejector8 x turning tools1 x lathe four-tooth ejector1 x 6-inch linkage chuck1 set of drill chucks1 x lathe extension guide

• 【Specifications】: Lathe size: 750*200*455mm/29.5*7.87*17.9in, voltage: 220V (the voltage can be shipped to you according to the voltage of the country where you place the order), frequency: 50HZ, rotation diameter: 254mm/10in, motor power: 550W, tool holder length: 152MM/5.98in, maximum processing length: 450MM/17.7in (the lathe extension guide rail can increase the maximum processing length to 1000mm/39.4in), disc diameter: 75mm/2.95in, stepless speed regulation: three-speed speed regulation
• 【8-piece woodworking turning tool set】: The tool bar is made of 65 manganese steel as a whole, 5mm thick raw material to ensure the accuracy of the tool bar, and the thickness after grinding is 4mm. The knife bar is oil-fired and tempered as a whole, with a hardness of HRC58-63. The handle is made of beech wood with better hardness and a double-layer panel wooden box.
• 【Three-speed stepless speed regulation】: industrial-grade American safety switch, according to your own production process requirements, the spindle speed can be adjusted at any time to 640-1450rpm/1250-2850rpm/1650-3800rpm, and it also has an emergency control button to protect the safety of the staff!
• 【6in linkage chuck】: Specifications: outer diameter: 154MM/6in, connection thread size: 1”-8T, positive jaw clamping range: 5~100mm, reverse jaw clamping range: 98~135mm.
• 【Wide range of use】: can be used to process various wooden crafts such as Buddhist beads/wooden bowls/wooden plates/pen holders/vases, suitable for novice DIY and teaching use!